Customers choose us for good reasons

Next Energy & Resources solar cell modules
guarantee high reliability and peace of mind.

太陽電池モジュール

Our modules have passed various tests such as the PID test. In addition to great durability, our products are strictly tested at our Product Technology Center in the constant pursuit of quality. In addition to our 10-year product warranty and 25-year output warranty, we also offer peace of mind for our customers’ power generation services by promising to compensate for "loss of production(profit loss) during repair or replacement" caused by any defect in our products not covered by our product warranty or output warranty.

Outstanding reliability and durability

Our modules are subjected to TÜV salt damage testing, ammonia testing, and PID testing, among other testing, to ensure outstanding durability. At our Product Technology Center, we carry out other sophisticated reliability tests using solar simulators, environment chamber, and so on, to ensure ultimate product quality.

Outstanding reliability and durability

Dual backup warranty at bankruptcy

Dual backup warranty at bankruptcy

10-year product warranty and 25-year output warranty for our modules.
As a manufacturer, Next Energy & Resources is covered by SolarSafe insurance from Aon-COFCO insurance broker through the original manufacturer, ensuring double or triple protection over the long term.
Furthermore, we offer compensation for up to 10 years based on our own regulations for "Loss of production (profit loss) during repair or replacement" caused by any defect in our products not covered by our product warranty or output warranty.

  • We will continue to honor our warranties using alternative products even if the original (overseas) manufacturer goes bankrupt. And in the worst case of our own bankruptcy, the original manufacturer will continue to honor the warranty to our customers (excluding compensation for Loss of production).
  • Should both we and the original manufacturer suffer bankruptcy, the SolarSafe insurance provided by Aon-COFCO will activate and the insurance company will minimize losses to the customer.
  • In the event that it is necessary to make a warranty claim after such bankruptcy, the customer may make a compensation claim directly to Aon-COFCO (with Japanese language support).
  • For details of the indemnification conditions, etc., please contact Aon-COFCO or our sales representative.
  • The customer is not required to pay any insurance premiums.
Diverse options for various conditions

Diverse options for various conditions

Anti-reflective processing

AR coating decreases the reflection of sunlight from glass surfaces, reducing glare. Thanks to flat coating Not by roughened surface, there is no degradation of performance due to adhesion of dust.

Reinforcement bars

Reinforcement bars

Ruggedized models are also available with reinforcement bars on the back surface to prevent deformation or damage due to snow load or wind pressure.
Wind and snow resistance of 10000 Pa have been achieved.

Impressive track record

Next Energy & Resources solar cell modules have been used at numerous mega-solar and large-scale solar power plant facilities. (Projected deliveries for 2013 exceed 100 MW.)

Impressive track record

For EPC contractors, we also provide components separately. Please contact us for details.

  • Mega-solar and Industrial solar power generation
  • Solar cell modules
  • System products sales
  • Monitoring maintenance
  • Pile-driving method “Next Piler”
Product list

NERM156×156-60-M SI

Format NERM156×156-60-M SI 275W NERM156×156-60-M SI 270W
Nominal maximum output (Pmax) 275W 270W
Nominal maximum power current (Ipm) 8.93A 8.50A
Nominal maximum output operating voltage (Vpm) 30.80V 31.8V
Nominal short-circuit current (Isc) 9.38A 9.12A
Nominal open-circuit voltage (Voc) 38.52V 38.6V
Conversion efficiency (%) 16.8% 16.4%
Maximum over-current protection rating 15A
Maximum system voltage 1000VDC
Nominal weight 18.2kg 19.0kg
Nominal size W991×H1650mm D40mm W992×H1650mm D40mm
Number of cells 60sheets(6×10)
Cell size & cell type 156.75×156.75mm (6 Inch) / Si Single crystal cell 156×156mm (6 Inch) / Si Single crystal cell
Mechanical load testing
(resistance to wind pressure & snow load)
Withstand snow load 5400Pa(front side/include wind pressure)
Withstand wind pressure 2400Pa(back side)
Anti-reflective processing (Option)
Reinforcement bars (Option)

※Radiation intensity:1000W/m2 / Spectral distribution:AM1.5 / Module temperature:25°

太陽電池モジュールNERP156×156-60-P SI

Format NERP156×156
-60-P SI 265W
NERP156×156
-60-P SI 260W
NERP-CS6612P
-320W
NERP156×156
-72-P SI 315W
NERP156×156
-72-P SI 310W
Nominal maximum output (Pmax) 265W 260W 320W 315W 310W
Nominal maximum power current (Ipm) 8.54A 8.34A 8.56A 8.41A 8.29A
Nominal maximum output operating voltage (Vpm) 31.02V 31.2V 37.38V 37.4V 37.4V
Nominal short-circuit current (Isc) 9.08A 8.98A 9.06A 9.00A 8.97A
Nominal open-circuit voltage (Voc) 38.05V 37.9V 46.22V 45.8V 45.5V
Conversion efficiency (%) 16.2% 15.8% 16.5% 16.1% 15.8%
Maximum over-current protection rating 15A
Maximum system voltage 1000VDC
Nominal weight 18.2kg 19.0kg 26.0kg 23.0kg
Nominal size W991×H1650mm D40mm W992×H1650mm D40mm W991×H1956mm D45mm W992×H1966mm D50mm
Number of cells 60 sheets(6×10) 72 sheets(6×12)
Cell size & cell type 156×156mm(6 inch)/ Polycrystal cell
Mechanical load testing
(resistance to wind pressure & snow load)
Withstand snow load 5400Pa(front side/include wind pressure)
Withstand wind pressure 2400Pa(back side)
Anti-reflective processing (Option)
Reinforcement bars (Option)

※Radiation intensity:1000W/m2 / Spectral distribution:AM1.5 / Module temperature:25°

太陽電池モジュールNE125×125-72-M(L)SI

Format NE125×125-72-M(L) SI 205W NE125×125-72-M(L) SI 200W
Nominal maximum output (Pmax) 205W 200W
Nominal maximum power current (Ipm) 5.46A 5.73A
Nominal maximum output operating voltage (Vpm) 37.6V 37.3V
Nominal short-circuit current (Isc) 5.78A 5.72A
Nominal open-circuit voltage (Voc) 45.7V 45.6V
Conversion efficiency (%) 16.0% 15.6%
Maximum over-current protection rating 10A
Maximum system voltage 1000VDC
Nominal weight 15.5kg
Nominal size W808×H1580mm D35mm
Number of cells 72 sheets(6×12)
Cell size & cell type 125×125mm (5 Inch) / Si Single crystal cell
Mechanical load testing
(resistance to wind pressure & snow load)
Withstand snow load 5400Pa(front side/include wind pressure)
Withstand wind pressure 2400Pa(back side)
Anti-reflective processing (Option)
Reinforcement bars (Option)

※Radiation intensity:1000W/m2 / Spectral distribution:AM1.5 / Module temperature:25°

High efficiency module for residential or narrow space

Format NER660M290
Nominal maximum output (Pmax) 290W
Nominal maximum power current (Ipm) 9.12A
Nominal maximum output operating voltage (Vpm) 31.80V
Nominal short-circuit current (Isc) 9.57A
Nominal open-circuit voltage (Voc) 39.46V
Conversion efficiency (%) 17.7%
Maximum over-current protection rating 15A
Maximum system voltage 1000VDC
Nominal weight 18.5kg
Nominal size W991×H1650mm D40mm
Number of cells 60sheets(6×10)
Cell size & cell type 156.75×156.75mm (6 Inch) / Si Single crystal cell
Mechanical load testing
(resistance to wind pressure & snow load)
Withstand snow load 6500Pa(front side/include wind pressure)
Withstand wind pressure 2400Pa(back side)
Anti-reflective processing (Option)
Reinforcement bars (Option)

※Radiation intensity:1000W/m2 / Spectral distribution:AM1.5 / Module temperature:25°